Arctic Cat | Polaris | SkiDoo | Yamaha | Clutch Tools/Accessories | Traction | CurveXS Skis

Ramp Grinding Block
Suggested list price $54.95

DCT-GB
The DaltonPro ramp grinding block is compatible with all brands.

Flyweight Bushing Tool
Suggested list price $14.50

Flyweight Replacement Bushings
Suggested list price $33.50

DRB-001

OEM replacement bushings for flyweights on Arctic pre 2004 models

DRB-002
Suggested list price $52

Replacement bushing Dalton Yamaha flyweights.(duralon)

DCT-BT
The flyweight bushing tool makes installation and removal of flyweight bushings easy. (Arctic Cat, Polaris, Yamaha)

Clutch Spring Tester
Suggested list price $179

DCT-ST
A critical tool for serious clutch tuners. This compression spring tester can be mounted in any drill press, and used to compare engagement pre-load and full shift load at any specified height.

Helix Replacement Bushings
Suggested list price $18

DHB-Y
An OEM quality replacement bushing for all
Yamaha helixes. Sold individually.

DHB-Q  Skidoo "Q" helix bushing

DHB-A   Arctic "C" type helix/cover bushing

 

New Clutch Tool for '08-'09 Ski-Doo XP Helixes
Suggested list price $79

DCT-CQ

Dalton Compression tool for the new QRS clutch on 2008-2009 Ski- Doo “XP” series. After removing the clutch from the new XP this compression tool makes helix and secondary spring changes easy.

DCT-CQ10

New compression tool for the 2010 XP sleds. A different shaft and belt adjuster requires this version of the tool on the new chassis.

Quick Adjust Screw Hardware
QACA-SH
Suggested list price $6.25
(one pkg of 6 assorted for one flyweight)

This pkg of hardware is a replacement pack. They are sold as a pack for each quick adjust individual flyweight. Fits all Dalton Snowmobile quick adjust flyweights. 1/4" UNC with pre applied nylon patch.

Spider Shim Kit from Hooper Racing

Suggested list price $25

Spider shims are a means for experienced clutch tuners to control the amount of slippage on engagement and the leverage of the flyweights at different phases of the shift pattern. This Spider Shim kit from Hooper Racing is a selection of both large diameter and small diameter shim washers for shimming the spider distance and belt gap on Arctic Drive clutches. This kit comes with basic instructions for the use of and effect of various spider shims,it is however for experienced clutch tuners and those with spider grunt tools and special holding fixtures.

Spider Jamb Nut Socket
Suggested list price $49

DCT-SK1

New jamb nut tool for removing the jamb nut before removal of spider assembly.Later 2010 and newer Jamb nut socket is different from previous models that used to have 1 7/16 jamb nut. This new one is 36 mm, however , many sockets are made oversize and do not fit this rounded nut well and can slip. This precision machined Socket is a perfect fit and has the inner hub machined to fit close over the shaft to keep socket vertical during removal of the jamb nut.

Caution- proper heating and procedure is required for working on drive clutch. This tool should only be used by qualified dealers and experienced service personel with service manual procedures. Irrepairable drive clutch damage or personal injury could result. 

Clutch Holding Fixture
Suggested list price $68

DCT-HF01

Large tapered clutch holding fixture for the Arctic/Jaguar Z-1 Turbo sleds.This tool is used to hold the drive clutch while the spider is being removed with Arctic Grunt tools. Many tuners in 09 Turbo Arctic models used clutch kits that required different shims under the spider for better belt clearance and flyweight performance. This simple economical tool mounts in any large shop vise and is used with the clutch torque specs and center bolt from factory.

Clutch Pullers

DaltonPro Clutch Pullers are accurately machined from super tough 17-4 series stainless steel.

 

 

 

Available Clutch Puller Applications Dalton
Part #
OEM
Part #
Polaris    
All ATV (85-2010) except 550/850, and RZR models
Suggested list price $61.50
DCP-A

2870506

All snowmobiles through ‘98
(except domestic twins)

Suggested list price $61.50
DCP-A
2870506
97-99 domestic twins (500, 600, 700cc)
Suggested list price $75
DCP-B
2871855
00-07 domestic twins
99-03 440 XC Edge
99-03 700/800 XCR
2011+ RZR 900XP
Suggested list price $75
DCP-C 2872085
Arctic Cat    
All snowmobile models 1996-2009 (except 07 and up 1000cc two stroke, twin cyl four stoke Jaguar based models).
Suggested list price $61.50
DCP-D
0644207
ATV AC650 V Twin 4X4 only
Suggested list price $50.50
DCP-G
0444-161
07 F/M1000(4 arm), 08-09 1000cc 2 stroke twins, Jaguar/Z1 Turbo models
Suggested list price $61.50
DCP-H 0644-446
2010 + 800cc HO and other 2010 + Z1/turbo models.
Fits 2012 Procross/Proclimb models
OEM Part # 0744-062

Suggested list price $61.50
DCP-N 0744-062
Ski-Doo    
TRA all through ('92-2011) EXCEPT 583 engine and smaller, and the E-tec 800 2011
Suggested list price $50.50
DCP-E
5290224

E-tech 2011

This version of the TRA primary puller has shorter end pin length to fit the e-tec top end of the crank, which is different from the regular previous 800 engine.

(*last updated Dec 2010,Skidoo may make more new puller part numbers available)

Suggested list price $50.50

DCP-O
*(see note)
Yamaha    
All YPZ/YXR
Suggested list price $50.50
DCP-F
Y501882
Kawasaki (ATV)    
All 360,400,650,700 automatics 1999 & up
Suggested list price $50.50
DCP-G 5700-1429

Digital Gram Scale
Suggested list price $72

J 200 XV
Many professional tuners of snowmobile and automatic ATV’s use gram scales to achieve balanced total mass after adding or subtracting flyweight grams. This durable, portable scale is a favorite proven performer with the following features:

•200 g capacity x 0.01 g increments
•Stainless steel tray with lid •4 key operation
•Compact 3”x 4.75” size •Large red backlit display
•Comes with calibration weight

 

Dalton offers an industry leading selection of clutch tuning components. If you are looking for specific set up information for your application, there is info here that may be of help.
 
 
Site and contents Copyright © 2013 Dalton Industries Ltd.